• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. They do not rot or rust like aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will save you from unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and even be fatal. It is essential to make sure that your windows are in good shape.

Single-pane windows are relatively easy to replace and will usually fit into the frames of the past easily. If windows with double glazed window repairs near me panes are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this situation, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

If you're planning to attempt to remove the window panes yourself it is crucial to wear appropriate safety gear such as gloves that are thick and eye protection. It is also recommended to lay down a drop cloth prior to when you begin working on the glass, so that any shards will fall on the fabric instead of onto the floor where they could be trampled upon and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to block water and drafts from getting into the property until a professional can come out and repair the window. This also serves as an obstruction to prevent criminals from getting into your home. If the gap is large, you might want to consider using a security door that has an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, with time, they are susceptible to a range of problems including sliding. A sagging window can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to prevent the problem from worsening.

Repositioning the hinges can help fix a window that is sagging. To do this, you'll need open the window to access the frame. Then, you can remove the top and bottom hinges using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you've moved your hinges. If you're happy with the fit, you can tighten the screws to ensure they remain in the right place.

If you can't reposition the hinges you may need to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes them to lose tightness. It is important to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. The majority of the time it is due to screws that have come loose over time. However, it could occur because the handle mechanism has worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need to shut the window and then perform an experiment fitting. The joint at the corner of the sash must align with the joint on the casing. If it doesn't, you can use the screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains it's crucial to take action. Leaks of water from windows can cause structural damage to your home and also hinder your ability to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix that can be completed by any skilled DIYer. Depending on the severity of the issue the caulking that was used up may require removal before a new layer of caulk can be applied. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area more difficult to clean and can reduce your energy efficiency.

Make sure that the drainage holes are free of debris in them and ensure that the sill pan has been angled correctly to drain away from the window. In more serious instances, you might have to consider replacing the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to note that if the leakage originates from the glass in your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sliding. This can be easily corrected by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window repairs is difficult to open, or if it blows open with the breeze. They can be repaired by any skilled DIYer and can be completed in a matter of minutes.

Most households in the UK will have top-hung or side hung uPVC windows that use hinges and, like all mechanical parts, they will wear out over time. It's very simple to replace a hinge on a window, but it's easier if someone else helps you hold the frame.

Verify that the uPVC hinges open and close in the proper direction. Look for the arrows that are on each hinge to determine which direction the window repair near me should be opened.

The problem with the hinges on windows could be caused by improperly opening the window in a certain way or due to poor installation at the factory. This can often be resolved by sending us a photo via our website and we will be pleased to offer you advice.

It is also crucial to grease the hinges regularly. Applying a light engineering lubricant on the hinges is a great method of doing this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. Ideally, you should do this once a year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a few different factors. The hinges can also be unbalanced due to wear, which can cause an opening where the sash and frame meet. If they are beyond repair, it might be necessary to get them re-aligned. In addition, the interlock could also become misaligned. It is located on the hinge's side and could require to be cleaned. In some cases it might be necessary to replace the hinges.

These seals can wear down or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help regulate indoor temperatures, and reduce the risk of draughts.

Another, and most effective methods to reduce draughts is by using a draught excluder, these are usually fabric tubes which are filled with a kind of filler. They can be placed on the windowsill on top. These will help to keep cold air out and keep your home warm and cosy!

With a little maintenance and repairs windows made of upvc will continue to provide an excellent level of security and insulation for your home. However, it is important to recognise that windows last for a certain period of time and eventually, they will reach a point where it is more cost-effective to replace them rather than fix them. If you are experiencing issues with your window made of upvc you should consult an expert as soon as possible.