• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. They don't decay or rust as aluminum or timber.

It is essential to clean and oil UPVC windows and doors regularly. This will save you from unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

If the glass in your window repair is broken it can cause a great deal of damage to your home, which can make it extremely dangerous and possibly fatal. You should take the time to ensure that your windows are in good shape.

For single pane windows, it can be relatively simple to replace them, and the new window is usually able to fit into the frame of the previous one easily. If you have double-paned windows that are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this situation it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.

If you're planning to try to remove the window panes by yourself it is important to wear appropriate safety gear, including thick gloves and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled.

It's a great idea to tape the gap once the glass is removed. This will stop drafts and water from entering your home until a professional arrives to repair the window. This will also act as a barrier that will prevent any intruders from getting access into your home. If the gap is large, you may be interested in the security door with an integrated window, as it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash window. As time passes, they may develop a number of problems, including sagging. A sagging window in uPVC can cause issues with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from getting worse.

Repositioning the hinges can aid in fixing a window repair near me that is sliding. To do this, you'll have to open the window to get to the frame. Then, you can remove the hinges on the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close your window and test it for fitting. If you're happy with the fit, tighten the screws until they remain in position.

If you can't reposition the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to lose their tightness. If this happens, it's essential to replace the seal as soon as possible so that your uPVC windows are watertight and safe from drafts.

UPVC handles can also become loose. Most often this is due to screws that have become loose over time. However, it could occur because the handle mechanism has worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need close the window and then perform an initial test to ensure that it fits. The joints at the corners of the sash should align with the joint on the casing. If it isn't, you can use a screwdriver to loosen the handle and turn the mechanism back into its original position.

3. Water Leaks

It is essential to act if you awake each day to find a smoky wall and floors that are wet. Water leaks from windows not only lead to the degradation of your home's structure but also hinder your efforts to control the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is either damaged or is missing.

This is a fairly simple fix and should be undertaken by any DIY expert. Based on the severity of the issue the caulking used previously might need to be removed before a fresh layer is applied. It is essential to remember that when it comes to uPVC window repairs you should not be tempted to 'over-caulk in order to make the area more difficult to clean and could reduce the efficiency of your energy.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more severe situations, you may have to replace the window.

Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to note that if the leakage is coming from between the glass in your double glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open with a breeze, it may be hinges at the fault. These are easily repaired by any skilled DIYer and are usually completed in a matter of minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that have hinges and, just like any mechanical component they will wear out over time. The process of replacing a hinge on a window is essentially a simple process, but it's easier with someone else to help hold the frame up.

It is also worth checking that the uPVC hinges are being opened and closed in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a certain way or by improper installation in the factory. Sending us a picture via our website will often solve the issue. We are always happy to offer suggestions.

It is also crucial to grease the hinges regularly. Applying a light engineering lubricant on the hinges is a good method to accomplish this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window repairs near me easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. Ideally, you should do this once a year. WD40 and other solvent based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by different factors. The hinges may also become disaligned as a result of wear, causing an opening where the sash and frame meet. They can be fixed by giving them a good cleaning, but when they're beyond repair, it might be necessary to have them re-aligned or replaced. Secondly the interlock, this is on the hinge side of the window, may be misaligned. Again, it's feasible to give them a good clean, but in certain cases, it may be necessary to get them replaced.

The seals may wear out or be damaged over time, allowing air escape. Installing high-quality weatherstripping will help to stop draughts. Another alternative is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and again will reduce the risk of draughts.

Another, and most effective ways to cut down on draughts is by using an draught excluder. These are typically fabric tubes filled with some sort of filler and can be placed on top of your windowsill. They will help block out cold air and keep your home warm and cosy!

With a little maintenance and repair windows made of upvc will provide a great level of insulation and security for your home. However, it is important to recognise that all windows have a life span and they may reach the point when it's more efficient to replace them than repair them. If you have any problems with your upvc window it is recommended to speak with an expert immediately.