• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. They do not decay or rust as aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce costly repairs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and even be fatal. It is essential to ensure that your windows are in good shape.

For single pane windows it is fairly easy to replace them, and the new window will usually fit inside the old frame very easily. However, if you have double pane windows that are held in place by internal beading it will be more difficult to take out the old panes and put in new ones. In this instance, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

If you are going to attempt to remove the window panes by yourself it is crucial to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a dropcloth before you start working on the glass so that any shards fall on the fabric rather than on the floor, where they could be trampled upon and cause further damage.

It's a good idea to seal the gap after the glass has been removed. This will prevent water and drafts from entering your property until a professional comes out to fix the window. This will also provide a barrier to prevent any intruders from making their way into your home. If the gap between the window and the door is large, you might need to consider security screens that includes a window. This will provide the best of both.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. As time passes, they may be affected by a variety of issues such as sagging. A sagging uPVC windows could cause issues with light, draughts, and even security. It's important to take action as soon as you realize that your uPVC windows are sliding.

To fix a window that is sagging you can try to reposition the hinges. To do this, you'll have to open the window to get to the frame. Then, using an screwdriver, take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and test it for fitting. If you are happy with the size of the window, you can tighten screws to secure them in the right position.

If you aren't able to move the hinges you may need to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to lose tightness. It is crucial to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. Often, this is caused by screws that have become loose over time. However, it can occur because the handle mechanism has worn out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. First, you'll need to close your window and do an initial test fit. The joints at the corners of the sash must align with the joint on the casing. If it doesn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is essential to take action if awake each day to find a smoky wall and wet floors. The leaks of water from windows do can not only cause degradation of your home's structure but also hamper your efforts to regulate the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is damaged or missing.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on how severe the issue is, old caulking may have to be removed. It is crucial to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and reduce your energy efficiency.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious cases you might need to consider replacing the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to remember that if the leakage originates from the glass in your double glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sliding. This can be easily corrected by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open, or if it opens with a breeze. These are easily repaired by any DIYer who is skilled and are usually completed in just a few minutes.

Like all mechanical parts, hinges can wear out over time. It's easy to replace a hinge on a window but it's much simpler if you have someone to help you hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. This can be done by looking for the arrows on each hinge. This indicates which way the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a particular way or due to poor installation at the factory. It is usually possible to fix the issue by sending us a photo on our website. We will be pleased to offer you suggestions.

It is also important to grease the hinges regularly. Applying an engineering lubricant that is light to the hinges is an ideal method to accomplish this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also reduce the possibility of a window sticking and help prevent corrosion. This must be done at a minimum every year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by different factors. The hinges may also become misaligned due to wear, causing an opening between the frame and sash. If they are beyond repair, it may be necessary to get them re-aligned. The second is the interlock, which is on the hinge side of the window repairs and can also become misaligned, again it is feasible to give them a good clean, but in some cases it might be necessary to have them replaced.

The second most frequent cause of draughts is the window seals, these are prone to wear or damaged over time and will allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help control indoor temperatures and decrease the possibility of draughts.

The final method to cut down on the amount of draughts is to use a Draught-excluder. These are typically fabric tubes filled with a filler which can be put on top of your window sill. They can help keep cold air out and keep your home warm and cosy!

With a little regular maintenance and repairs windows made of upvc will continue to provide an excellent level of insulation and security for your home. It is crucial to realize that windows last for a certain period of time and there may come the point when it's more efficient to replace them than fix them. So, if you are having issues with your upvc windows, it is recommended to seek assistance from a professional immediately.