• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

You may need the key fob to be programmed by an automotive locksmith or a Subaru dealer, based on how old your Subaru is. This is done by connecting a computer machine to your vehicle.

To program your Subaru to program, open the driver's side door using the door button, and then close it. You will hear a chime in the instrument panel, and the dome lights will flash.

Step 1: Locate the circuit board of your transmitter

There are many ways to program your key fob. First, you must determine what kind of key fob you have. This can be done by looking at the form of the key fob or by listening for a sound in your car.

Once you've got the information you need, you can begin the process of programming your keyfob at home. To accomplish this, you'll need a metal key and a screwdriver that has a flathead. You can open the key fob by twisting it. Then push the key in and pull the battery from the tiny tabs that hold it in place. Replace the battery with a new one and put the key fob case back together.

Step 2 Step 2: Unscrew the Key Fob Case

Changing the battery is a good idea since it can bring back key fobs which aren't working for a while. In some instances the buttons on the key fob can be broken. If you notice that the contacts made of metal on the button have come loose, try soldering them in place again to make them work again.

Before you start the process, ensure your car's doors are shut and the ignition is off. You can accomplish this by closing the driver's door and pressing the door button ten times in quick sequence. Then you'll hear the instrument panel chime and the dome light will flash. This indicates you're now ready to proceed.

Step 3: Insert the fob for the key into the ignition

A lot of articles on the internet will tell you how to reprogram a subaru key fob to program your new subaru key fob or replacement subaru key Subaru keyfob at home. But, the majority of them do not give precise instructions. A professional auto dealer or locksmith in Fort Bliss is the best option for reprogramming an electronic car key.

Sit in the driver’s seat with all doors shut and the engine turned off. Use the door button to unlock all doors. Close and open the driver's doors two more times. Then, insert and remove the key from the ignition switch (don't turn it) 10 times within 40 seconds. The system will chirp when the settings are altered.

Step 4 4. Turn on the ignition.

It is essential to realize that this method of programming a key fob only is effective if you have a working key. If you do not, then a dealership or auto locksmith will be required to program a new key for your Subaru in Fort Bliss.

After your key has been programmed, you should be able start your car in less than five seconds. Begin by closing all doors, then turning off the engine. Next, sit in the driver's seat, and then unlock all doors using the door button control. Insert the key in the ignition and turn it back to the first position. The electrical systems will be activated but the engine will remain in neutral. Repeat this process 10 times.

Step 5: Unlock the Driver's Door

Subaru provides a variety of high-end cars with key fobs which can lock and unlock the doors, start the car, and defrost the windows. However, sometimes, these devices stop working properly.

To resolve the issue to fix it, you must contact a locksmith or the dealer. This will solve the issue and ensure your vehicle is safe.

It is necessary to first open and close the door on the driver's side. Then, put the ignition key in and change it to the off position. Then, you can return it to the off position. Repeat this 10 times in the row as fast as you can. After the tenth time, you will hear a chime.

Step 6 Step 6: Press the Lock/Unlock key on the Driver's Door

If you are looking to replace the battery inside the Subaru key fob, the procedure is straightforward. The fob's case on the outside is opened. Make use of a flathead to pry the casing open inside and take out the batteries that were in there.

After taking the battery out to replace it, you can replace it with the new one. Close the case. Relax in the driver's seat and unlock all doors using the door button control. Put the key in the ignition and turn the key to ensure that the electrical system is switched on, but the engine is off. Repeat this ten times until you hear the chime on the instrument panel. This will bring the system into programming mode.

Step 7: Press the Passenger Door Lock/Unlock button.

The irritating chirp that can be heard when unlocking or locking the Subaru Key Fob from the outside of the vehicle can be very distracting for some owners. In some instances you can deactivate the chirp by opening and shutting all doors while double-clicking the lock button on your key fob.

Switch off the ignition and shut all doors as well as the lid that holds the fuel. Press and hold the lock side of the key fob's lock button for 10 seconds. The instrument panel emits a chime once this is achieved. The chime signals that the fuel-filler lid and door are locked. It is possible to alter the setting so that doors lock automatically without pressing a button.

Step 8 Step 8: Enter your Transmitter's 8-digit Number

Write down the first series of 8-digits, and keep it in your wallet. Now, sit in your driver's seat. Close all the doors and then turn the key to the first position (towards on). After ten turns, your instrument panel will sound once.

Next, open the key fob case and find the circuit board that controls the transmitter. The circuit board should have one or two numbers with 8 digits. Take note of the first number sequence and follow the instructions in this guide to register the code on the system of your vehicle. This procedure may require a visit to the dealer for older models.