• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Get Your Windows Repair Done Right the First Time

A storm that is severe or a stone that is thrown by a lawnmower or a mishap at home could cause your windows to crack. You might be able to get by with some temporary fixes until a Mr. Handyman of Anne Arundel and North PG professional can come to fix the damage.

The use of clear packing tape or masking tape can help prevent superficial cracks, such as spider cracks, from getting worse. Tape both sides of the crack.

Rotted Frames

Wood rot around your windows is not only unsightly and ugly, but it could be a danger to your safety. It can also lower the insulation value of a house. Frames that are rotten permit cold air to enter your home, and warm air to escape, which costs you money. The reason for this is that the rotting wood allows moisture to penetrate and deteriorate the inner frame, reducing its ability to hold cool or warm air in your home.

In addition, a weakened window frame leaves your home vulnerable to burglars who are able to easily break the window to gain access to the interior of your home. Rebuilding and fixing your wooden windows will prevent this type of damage, and make your home more secure and appealing.

It is crucial to repair your window sills or frames made of wood in the earliest time possible, before the problem gets worse. Typically, the first sign of rot will be visible cracks in your paint or spots of discoloration on the wood. The wood might feel soft or mold may build up on the inside of the window frames.

It is important to contact a professional immediately if you notice any of the above issues. Wood rot spreads rapidly, so the sooner it is addressed it is, the less it will be to repair. If you wait until all the wood has rotted away it will be impossible to repair.

Fortunately, windows with rotting frames and sills can be repaired in 99% of cases when the rot is detected early. Our technicians are highly skilled and are able to repair the rotting parts of the frame to give you windows that look like new.

Muntins and Mullions

The mullions or muntins between your window panes function as more than just decorative elements. They also support the glass. They are a standard part of windows, and they can be damaged or even broken. It doesn't matter if they are real, fake or both, but if your muntins or mullions are chipped, cracked or scratched, it's essential to fix them. They can make your home look less appealing.

Muntins & Mullions

While they look similar and are often mistaken for each other (perhaps the alliteration can help) Multins and mullions are two different window components. A reliable window repairs installation company will explain the distinctions between them to avoid miscommunication and confusion.

Mullions or dividers are typical in multi-paned windows. In the past, they were used to support and separate large sheets of glass. Nowadays, they are an ornamental and design element that can give a timeless look to your home.

While mullions aren't the most secure part of your window, they provide some security. If a thief breaks one of your window panes, he or she will likely break the mullion as well to get into your home.

Putty can be used to fix broken mullions or muntins. Window repair professionals clean the surface and apply fresh putty before resecuring them. This is a simple repair to your window that won't impact the performance of your window.

There could be a problem with the frame or sashes if your windows leak or fail to open and close properly. Some sashes get stuck in the frames due to broken cords or springs. They may be too heavy or have been thrown off the track. Balanced springs and weights can make a sash hard to raise or lower.

The wood strips that hold a single piece of glass in position on a window that is older are called muntins, or mullions. If these become rotting and need to be replaced, they should be rebuilt. Window repair specialists will replace rotted muntins and the mullions with no impact on the performance of your windows.

One of the most common problems with windows that are old is the sill, which might not slope downward enough to let water drain away. It is essential to inspect the sill and make sure that it slopes downwards away from the house. If it isn't, a drip cap can easily be installed. It's an easy task that will drastically minimize the possibility of moisture infiltration.

Sashes

If window sashes don't function properly, it's time to take an examination of the situation. Wooden windows sashes can be affected by changes in weather and the passing of time. If they don't open properly, water or air can easily enter the room. Aluminum sashes could become unsuitable due to similar circumstances. The dampness and sweating around windows are typical symptoms of these problems.

The most common cause for issues with sash is simple wear and tear. They can usually be fixed by sanding, filling, and painting over. More serious problems will require the removal of the entire structure. This is a task best left to professional window repair companies.

The sash can be disassembled by first removing the locking pins and the sash cords from the window frame. Next, remove the parting beads (vertical strips of wood that hold the upper sash) and pull out the upper sash. Once the sash is free you can remove the hardware that holds it and put it in a safe location.

The mortise and tenon joints of the sash are held by wooden pegs. Take the pegs off using pin punches and hammers. The majority of the time one side of a peg is bigger than the other and should be driven away from the smaller side to avoid damaging the sash.

There are pockets in which the glass panes are held after the sash is completely disassembled. These pockets are usually pinned or screwed into place and should be gently prised out with a sharp knife.

Once pockets are removed, the sash can be re-bedded in new glazing compound. The artist beds the sash by holding it up against a homemade easel and then working the compound into the groove, or rabbet, around the opening of the pane. After the sash has been stuffed, it is allowed to dry for two full days before being put back together. The sash is then treated using a homemade wood preserver made from one-half mineral spirits and one-half boiling linseed oil. This will help to reduce the amount of draughts and improve the ability to close and open the window.

Drip Caps

Drip caps are simple, nearly invisible caps that channel rainwater away from window frames during a storm. They are usually made of wood, although they could also be constructed from brick or another type of masonry. Some drip caps are designed to be decorative some are more utilitarian in appearance. Regardless of design, a quality drip cap should be strong enough to withstand the elements and keep water from leaking behind the casings, which can cause wood decay.

A drip cap can be installed by a homeowner using some basic tools and a little know-how. However most homeowners prefer having a professional contractor install their drip cap. The drip cap must be secured to the sheathing that surrounds a window at least an inch from the trim board, and then it should slope away from the window. It is crucial to use galvanized nails, and to apply a premium exterior grade sealant to the underside of the drip cap and the sheathing.

Homeowners can create drip caps at home with sheets of aluminum as well as a vice and a few basic tools. To make this happen the homeowner has to first remove or pry up a row of windows. Then, they will be able to cut the drip-cap to a length that is a bit larger than the the window. After the drip cap has been cut, it's slipped under the tape, and then nailed with galvanized nails to the sheathing. The cap should be nailed on both ends and firmly attached to the sheathing.