• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain and are durable and long-lasting. They do not decay or rust as aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home and even be fatal. You should take the time to make sure that your windows are in good condition.

Single-pane windows are relatively simple to replace, and they generally fit into frames that were previously in use very easily. However If windows with double panes are secured by internal beading, it'll be more difficult to take out the old panes and put in new ones. In this instance you'll need source some plastic spacers that will help the new pane to fit correctly into the frame of the window.

If you plan to attempt to remove the window panes by yourself it is crucial to wear the appropriate safety equipment, including thick gloves and eye protection. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass to ensure that any shards fall onto the cloth rather than on the floor where they can be trampled upon and cause further damage.

It's a good idea to tape the gap once the glass is removed. This will keep drafts and water from entering your property until a professional comes out to fix the window. This also serves as a barrier to prevent any criminals from getting into your home. If the gap between the window and the door is large, you might prefer security screens that includes a window. This will provide the best of both.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash window. As time passes, they may develop a variety of issues such as sagging. A window that is sagging can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from getting worse.

Repositioning the hinges can aid in fixing a window repair that is sliding. You'll first need to open the windows to access the frame. You can then unscrew both the top and bottom hinges using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after having relocated your hinges. If you're satisfied with the fit, you can tighten the screws to ensure that they stay in position.

If you aren't able to move the hinges, you may require replacing the seal. Rubber seals may dry out and lose their elasticity over time, causing them to loosen. It is important to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles could also loosen. This is typically caused by screws that have loosened over time, but it can be due to the handle mechanism wearing out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. First, you'll need to close the window and then perform an initial test fit. The corner joints of the sash must align with the casing joint. If it doesn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you wake up to wet floors and damp walls every time it rains it's important to take action. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature of your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is a relatively easy fix that can be completed by any skilled DIYer. Based on the severity of the issue the caulking that was used up may need to be removed before a fresh layer can be applied. It is crucial to remember that when it is about uPVC window repairs, you should not be tempted to apply too much caulk and then make the area harder to clean and can reduce the efficiency of your energy.

Check that any drainage holes do not have debris inside them and that the sill pan has been properly angled to drain away from the window. In more extreme instances, you may need to replace the window.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage occurs between the double-glazed glass it is more likely the issue is more with the seal rather than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open with a breeze, it may be hinges at the fault. They can be easily replaced by any competent DIYer and can be completed in a matter of minutes.

Like any mechanical component hinges will wear out over time. Changing a window hinge is an easy process, but it's easier with someone else to assist in holding the frame up.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The issue could be caused either by opening the window incorrectly or by a poor installation at the factory. Sending us a picture through our website can often resolve the problem. We are happy to give suggestions.

It is also crucial to lubricate the hinges regularly. Applying a light engineering lubricant to the hinges is an ideal way to do this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. This is recommended to be done at least every year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. The hinges can also become disaligned as a result of wear, which can cause gaps where the sash and frame meet. If they're beyond repair, it could be necessary to get them re-aligned. The interlock, which is located on the hinge of the window repairs, can also be misaligned, and again it is possible to give them a clean but in some cases it might be necessary to get them replaced.

The seals may wear out or get damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping can help keep draughts at bay. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures, and also reduce the possibility of draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are usually made of fabric tubes filled with a filler that can be hung over your window sill. They can keep your home warm by blocking cold air.

Your windows made of upvc will remain a great source of insulation and security for your home by performing regular maintenance and repairs. However, it is important to realize that windows last for a certain period of time and eventually, they will reach the point when it's more efficient to replace them than repair them. If you are having issues with your upvc windows, it's recommended to seek help from a professional as soon as you can.