• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Repairs

Window repairs can save homeowners money and help keep their homes warm. Window replacement may be necessary in the event of severe damage such as broken glass, or a window frame that has been smashed.

But many other issues can be addressed to extend the life of your windows. Common issues include:

Broken or cracked panes

Glass that is cracked could be caused by a lawnmowers that throws errant rocks or by the blow of a tree branch by strong winds. This not only looks bad, but it can also lead to higher energy bills as broken glass lets cold air into your home. It's relatively easy to repair windows with damaged panes.

Begin by carefully removing the glass with gloves and safety glasses. You may have to use an utility knife to remove old glazing compound or putty around the frame's edges. Then, clean the surface of the glass and the frame's wood with a soft cloth or paper towel.

After cleaning the area, apply a silicone caulking that is waterproof around the frame's perimeter. This helps prevent water from getting in through the crack, which can cause further damage to the frame and the glass.

If you have double-pane glass, cracks that are severe could damage the gas layer between the panes and make your windows less efficient in insulating. If the crack is so severe that it compromises the strength of the upvc window repairs near me or the inner pane is missing it is possible to consult an expert.

Thermal stress cracks may also occur when there's a significant temperature difference between your home and the outside. This causes the glass to expand and contract. If the cracks are situated on two sides of a glass, it is recommended to replace it instead of try to repair it.

If your windows are cracked and not yet ready to be replaced, clear tape can do a good job of preventing the crack from spreading and preventing bugs from entering cold air. You can also cut a nylon stocking large enough to completely cover the crack, and then attach it using duct tape. This is not a permanent solution, but it's a good way to keep insects and cold air away from your home. If you notice cracks or blemishes on your older windows You should consult the local company to determine whether replacing the entire window is a better solution.

Rotten Wood

Wood rot is a frequent problem with windows. It can degrade a house's appearance and create a security danger. It is possible to fix rotted wood. It is first necessary to identify the cause of the wood decay. This can be accomplished by examining for leaks in the roof or gutters that are not functioning cracking caulking, and any other areas that allow water to enter the wood.

Next, you will need to remove any rotten areas of the window frame. This can be done using a rasp, chisel or claw hammer. After you have removed the decayed wood, you'll have to replace it with new wood. It is recommended to choose treated wood for this project since it is more resistant to decay. If you are not able to replace the damaged timber, you can use filler and wood hardener to reinforce the damaged area. This type of product will be available at a majority of hardware stores. To get the best results, follow the instructions on the product label.

After you have repaired the rotten areas of the windowsill, it's essential to protect the newly-repaired area. Apply a water-resistant sealant to the wood. A product like Sikkens is a great choice to accomplish this task.

It is also possible to use a two-part epoxy filler to shield the wood from further damage. This product is easy-to-apply and leaves a beautiful finish. It is important to follow the instructions on the label. Once the epoxy filler is dry, you can sand the surface of the wood. Start with a rough sandpaper and then move on to more smoother grades.

You don't want to expose the damaged part to further moisture. It is a good idea therefore, to cover the repaired surface with an oil-based primer which will shield it from moisture. Then, you can apply waterproof wood sealant.

It won't open

A window that isn't opening could be due to various reasons. Wood frames can warp in humid weather, the house could have settled or someone may have nailed it shut to protect themselves. However, with a little patience and the right tools, many windows that are stuck can be opened.

One of the main causes of a window that isn't able to open is the accumulation of gunk or debris on its moving parts. The buildup of dirt and grime on the sliding tracks, hinges, and locks over time, says Acme Glass. Additionally, metal hardware is prone to get rusty when in contact with humidity and direct sunlight. Maintaining these areas lubricated by spray grease can prevent oxidation and keep your window working properly.

The pulleys used to raise or lower the window could become loose, or even break. These components may lose tension and become obstructed particularly when the window is two or more stories above the ground.

If you are having difficulty opening a door, try using a pry-bar to gently push the window open. Put a block on the frame of the window to give the pry bar more leverage. Be careful not to damage either the wood or the window. Try using a hairdryer to dry the frame's edges for a few minutes. This will warm the wood, making it easier to move.

A broken spring could be the reason for a window that won't raise or lower. You'll need to refer to the owner's manual for more details based on the manufacturer of your windows.

If you have tried cleaning the moving parts of your windows and lubricating them but they still won't open it could be the right time to replace windows with new, energy-efficient windows from Homespire Windows and Doors. Don't let windows in your home become functional to unusable. A window that isn’t properly shut can expose your home to burglary and water damages. Contact our team today to learn more about our replacement windows and services!